供应原装霍尼韦尔执行器M7284Q1009山东代理商详细内容
供应原装霍尼韦尔执行器M7284Q1009山东代理商
产品资料:
K8AB-PM1
K8AB-PM2
■Precautions for Safe Use
Make sure to follow the instructions below to ensure safety.
1. Do not use or keep this product in the following environments.
? Outdoors, or places subject to direct sunlight or wearing
weather.
? Places where dust, iron powder, or corrosive gases (in
particular, sulfuric or ammonia gas) exist.
? Places subject to static electricity or inductive noise.
? Places where water or oil come in contact with the product.
2. Make sure to install this product in the correct direction.
3. There is a remote risk of electric shock. Do not touch terminals
while electricity is being supplied.
4. Make sure to thoroughly understand all instructions in the
Instructions Manual before handling this product.
5. Make sure to confirm terminal makings and polarity for correct
wiring.
6. Tighten terminal screws firmly using the following torque.
Recommended tightening torque: 0.49 N·m
Maximum tightening torque: 0.54 N·m max.
7. Operating ambient temperature and humidity for this product
must be within the indicated rating when using this product.
8. There is a remote risk of explosion. Do not use this product where
flammable or explosive gas exists.
9. Make sure that no weight rests on the product after installation.
10.To enable an operator to turn off this product easily, install
switches or circuit breakers that conform to relevant requirements
of IEC60947-1 and IEC60947-3, and label them appropriately.
■Precautions for Correct Use
For Proper Use
1. Do not use the product in the following locations.
? Places subject to radiant heat from heat generating devices.
? Places subject to vibrations or physical shocks.
2. Make sure to use setting values appropriate for the controlled
object. Failure to do so can cause unintended operation, and may
result in accident or corruption of the product.
3. Do not use thinner or similar solvent for cleaning. Use commercial
alcohol.
4. When discarding, properly dispose of the product as industrial
waste.
5. Only use this product within a board whose structure allows no
possibility for fire to escape.
About Installation
http://cdxyd1718.cn.b2b168.com
欢迎来到成都鑫业达自动化成套设备有限公司网站, 具体地址是四川省成都金牛区黄忠街8号,联系人是魏波。
主要经营成都鑫业达以雄厚的技术实力和良好信誉,与世界着名工控产品厂商美国HONEYWELL(霍尼韦尔)、法国施耐德、日本OMRON、三菱、富士、山武、岛电、鹭宫、神港、理化(RKC)、西方WEST温控器、瑞典ABB、德国西门子、倍加福、美国A-B、美国GEMS、美国派克、英国C.T公司、闽台阳明、台达、台仪、厦门宇电、SMC,FESTO(费斯托)、等公司建立了长期稳定的技术和商务合作关系。。
单位注册资金单位注册资金人民币 100 万元以下。
我们公司主要供应温控器,变频器,PLC可编程控制器,伺服电机,阀门,开关等产品,我们的产品货真价实,性能可靠,欢迎电话咨询!