德阳供应GEMS紧凑型流量开关F6FS-380 F6179993S

德阳供应GEMS紧凑型流量开关F6FS-380 F6179993S
产品资料：
Conforming standards EN60255-5 and EN60255-6
Installation environment (Pollution Degree 2, Overvoltage Category III)
EMC EN61326
Safety standards UL508
Insulation resistance
20 M? min.
Between external terminals and case
Between power supply terminals and input terminals (excluding models with DC power supply)
Between power supply terminals and output terminals
Between input terminals and output terminals
Dielectric strength
2,000 VAC for one minute
Between external terminals and case
Between power supply terminals and input terminals (excluding models with DC power supply)
Between power supply terminals and output terminals
Between input terminals and output terminals
Noise immunity 1,500 V power supply terminal common/normal mode
Square-wave noise of ±1 μs/100 ns pulse width with 1-ns rise time
Vibration resistance Frequency 10 to 55 Hz, 0.35-mm single amplitude, acceleration 50 m/s2
10 sweeps of 5 min each in X, Y, and Z directions
Shock resistance 100 m/s2, 3 times each in 6 directions along three axes (up/down, left/right, forward/backward)
Degree of protection Terminal section: Finger protection
Wiring Diagram
Overvoltage Operation Diagram 
(Output Relay Drive Method : Normally Closed)
DIP switch setting: SW3 ON.
Note: The power ON lock prevents unnecessary alarms from being 
generated during the instable period when the power is first 
turned on. There is no relay output during timer operation.
Undervoltage Operation Diagram 
(Output Relay Drive Method: Normally Open)
DIP switch setting: SW3 OFF.
Note: The power ON lock prevents unnecessary alarms from being 
generated during the instable period when the power is first 
turned on. There is no relay output during timer operation.
Note: There is no polarity when a DC current input is used
Indicators
Setting Knobs
Note: 1. Use either a solid wire of 2.5 mm2 maximum or a ferrule with 
insulating sleeve for the terminal connection.
The length of the exposed current-carrying part inserted into