供应GEMS紧凑型流量开关F6FS-380 F6168434B郑州代理商

供应GEMS紧凑型流量开关F6FS-380 F6168434B郑州代理商
产品资料：
SW1
SW2
SW3
SW4
DIP switch
DIP Switch Functions
Note: All pins are set to OFF at the factory.
SWITCH ON ● ↑
OFF ? ↓
Power ON 
lock time
5 s --- --- --- ●
1 s --- --- --- ?
Resetting 
method
Automatic reset --- --- ● ---
Manual reset --- --- ? ---
Relay drive 
method
Normally closed --- ● --- ---
Normally open --- ? --- ---
Operating 
mode
Undervoltage ● --- --- ---
Overvoltage ? --- --- ---
Setting Method
1. Setting Voltage
The voltage knob (SV) is used to set the voltage.
The voltage can be set to 10% to ** of the maximum measuring voltage.
Turn the knob while there is an input to the input terminals until the alarm indicator flashes (when the set value and the input have reached the 
same level.)
Use this as a guide to set the voltage.
The maximum measuring voltage will differ depending on the model and the input terminal.
Example: K8AB-VS3 Using Input Terminal V3-COM
The maximum measuring voltage will be 600 VAC/VDC and the setting range will be 60 to 600 V.
2. Hysteresis
Hysteresis is set using the hysteresis knob (HYS.)
The setting range is 5 to 50% of the operating value.
Turn the knob while there is an input to the input terminals until the alarm indicator flashes (when the setting and the input have reached the 
same level.)
Use this as a guide to set the hysteresis.