MCGS昆仑通态触摸屏TPC7062TI

MCGS昆仑通态触摸屏TPC7062TI
产品资料：
Solder cap 
hole 
0.8 dia. × 2.5
Mounting Dimensions for XS3P Screw-on Models and Snap-in Models (Unit: mm)
Mating Connectors
Note: M8 screw models and S8 snap-in models cannot be connected to each other.
Ordering Information
Note: Orders are accepted in multiples of the minimum order.
Safety Precautions
In addition to the following information, also refer to Safety Precautions on page 21
Panel Mounting
?When mounting XS3P Panel-mounting Connectors to panels, refer to Panel-mounting Dimensions and provide rubber bushings 
and nuts for the Connectors. Apply a tightening torque of between 0.4 and 0.6 N·m to mount the Connectors.
Panel Cutouts
XS3P-@421-@
Note: The panel thickness is 1 to 3 mm.
XS3P-M422-2
PCB-mounting Dimensions
Note: The panel thickness is 2.4 mm 
maximum.
Panel-mounting 
Dimensions
Rear Lock
Front Lock
Item Model
XS3P(M8) XS3H (M8), XS3W (M8)
XS3P(S8) XS3H (S8), XS3W (S8)
Connection method Panel mounting Pin shape Applicable wires Model Minimum order
M8 screw-mounting Front lock or rear lock DIP pins --- XS3P-M421-1
50
Solder cup pins AWG24 max. XS3P-M421-2
Rear lock Solder cup pins AWG24 max. XS3P-M422-2
S8 snap-in Front lock or rear lock DIP pins --- XS3P-S421-1
Solder cup pins AWG24 max. XS3P-S421-2
XS3M Sensor Embedded Plugs
Dimensions (Unit: mm)
Mating Connectors
Note: The plug can be connected to both M8 screw and S8 snap-in models.
Ordering Information
Note: Orders are accepted in multiples of the minimum order.
●Embedded Plugs with Screw Threads and DIP Pins XS3M-K421-1